◪ Automatic slicer output short circuit,overload,over temperature,start delay and other protection.
◪ PA ststem with delayed start,protect speakers form impact damage.
◪ There are single-channel input,stereo,and mode selection.
◪ After the board is equipped with a dual-channel,bridge,single,putput converter.
◪ Dual binding posts,SPEAKON output connector.
◪ Switching power amplifier section has a separate section of the cooling system.
◪ The use of advanced continuously variable cooling fan control circuit.
Stereo power 8Ω | 1350W*2 |
Stereo power 4Ω | 20500W*2 |
Stereo power 2Ω | 2665W*2 |
Bridge Mono Power 8Ω | 4000W*2 |
Bridge Mono Power 4Ω | 5200W*2 |
Material | iron |
Usage | Stage,KTV,outdoor activities,ballroom |
Size | 483W*488D*133H |
Slew Ratio | 105V/S |
Input Power | 4800W |
Daming Factor | ≥800 |
Frequency Response | 20Hz-20KHz, ±0.5dB |
We support both OEM & ODM packaging. Our normally delivery method are by the sea, by air, by international express (DHL, UPS, TNT, FedEx)
DESCRIPTION and APPLICATION
1 Power supply design
Each equipment includes independent logic high rate of power supply,which can control electrical circuit to adjust power output and voltage from time to time, and to respond the request of signal and load,so it can get the best power match under the wide range of load,so to ensure the power amplifier will not be overheating.
2 Power output grade
Adopt the balance output circuit,the same as fully symmetrical Bridge Road:compared with the normal single end of land output circuit,the same work voltage can generate the output power in 4 times,that is to say,in order to get the same output power,the work power voltage of power amplifier is much lower thannormal OCL model.The output power tube is with wide safety work area under the condition of low voltage,so it is with higher power and reliability compared with normal OCL output model. Most importantly, The distortion of it is much Lower and can output better tone quality.
3 Sign Voltage Range
There is a limited voltage device within each input channel.By checking the output sign and controlling the input sign,so the power amplifier output will not be at the state of clipping in long time,and can protect the speaker.It can automatically control the input sign when the power amplifier is overheat,so can reduce the heat and keep safety.
4 Perfect protection function
Power amplifier provides various protecting function, such as .direct current protection,internal stoppage protection,input overload protection,filter of radio frequency distraction,output short circuit protection,mismatching load and high frequency overload protection, radiator and over temperature protection for radiator and transformer,over electricity protection.And the over temperature protection for output electricity is achieved by gradually lower the output signal.Only when the temperature keeps rising to the extremity,can it cut off the output electricity supply of this channel,so avoid the stop of play.
5 Heat dissipation system
There is an independent heat dissipation system for each channel,two groups of nonpolar speed adjusted Fan.The sealed air go through the radiator to strengthen the effect of heat dissipation,and at the same time,avoid the the dust and smog of stage to pollute the circuit board to ensure the equipment is in good working condition,and the temperature can get balance in some
range
Model | KM-2150 |
8Ω Stereo Power | 2×1500W |
4Ω Stereo Power | 2×2250W |
8Ω Bridged Mono | 4500W |
Input Impedance | >20K/>10K |
Frequency response | 20Hz-20KHz |
THD+N(Rated Power,4Ω/KHz)% | 0.05% |
Signal Noise Ration(dB) | -105dB |
Degree separation | -60dB |
Input Connectors | XLR |
Output Connectors | Speakon&touch-proof binding posts |
Power Requirement | 220V-240V,50-60Hz |
conformation | Steel and aluminum chassis |
Airframe Dimension | 88×483×430mm |
Net Weight | 40kg |
Q.Can you use our company logo and package type?
A:Yes,We are manufacture ,We provided this service, you can use our brand "Wiser" or your brand.
Q: I like the design but want to change a little part, is it possible?
A: Yes ,we will try to do it.
Q: I like the product/speaker but i want my own design, is it possible?
A: Yes, we specialize in customized designs for our customers, and welcome your good suggestions.
Q: I want samples with my own logo, is it possible?
A: Yes it is possible. A small charge may apply depending on requirements.
Q:What's your MOQ (Minimum order quantity)?
A:There is no MOQ limited ,you can choose to order 1pc or 1000000pcs.No limit about quality.
Q:Except product value and shipping cost, do I need to pay any other fees in China?
A:No other fees needed in China.
Q.How can I make the payment, what's your payment terms?
A:You can pay by TT,Western Union, Payoneer or Paypal.
Q.How long is your guarantee period of products?
A:3 year warrenty, if any problems during this period, we will sent you free replacements to repair, anyway we will find the best solution for you!
Copyright © 2025 Guangzhou KAIXU Audio Equipment Co., Ltd | All Rights Reserved Sitemap
Hello, please leave your name and email here before chat online so that we won't miss your message and contact you smoothly.